Schwank agroSchwank User Manual download pdf (Page 5)

GP-MAGR-BX-06A

agroSchwank / IN Manual

RD: Sept 2005

RL: 6

Page 2

2.2 MOUNTING CLEARANCES

2.3 HEATER MOUNTING

The luminous Heater must be mounted with minimum clearances as shown in sections 8.3 to 8.9. It

should also be located with respect to building construction and equipment, so as to provide sufficient

clearance and accessibility for servicing and cleaning of burners and ignition control.

WARNING:

The Pork Nursery Heaters cannot be installed inside degreasing plants, nor can

they be in an area where chlorine, fluorine or bromine are stored, or present con-

tinuously during the operation of the heater.

The Pork Nursery Heaters are approved for both horizontal and angle mounting. When angle mounting,

the short axis may be rotated in either direction to a maximum of 45°.

Improper angle mounting can re-

sult in damage to the heater or unsafe operation.

IMPORTANT:

For either horizontal or angle mounting, the long axis of the heater must be level.

Use only non-combustible mounting hardware.

2.4 VENTILATION REQUIREMENTS

It is required to provide a combined infiltration of natural and mechanical ventilation air. As well as

natural ventilation, it is recommended by the Manufacturer that an unvented heater be electrically inter-

locked to the existing Barn Automatic Ventilating system to prevent heaters from firing without ade-

quate Barn ventilation air for proper combustion. Be sure the air inlet grilles, louvers, and dampers are

inspected regularly and that they are clear and free of dust, dirt, snow, ice, frost and other foreign mate-

rial, so that air may freely enter into the building to provide adequate combustion and ventilation air.

1 2 3 4 5 6 7 8 9 10 ... 16 17

No comments

Schwank agroSchwank User Manual Page 5